Alacoque Door Handles September 03rd, 2017 - 08:17:23
Also when it comes to fitting a lock to a door you will need to decide whether you are going to have a separate handle and lock, or a fitting that combines both. It may well be that like most people you do not need locks fitted to every door, however if you do need some doors to be fitted with locks, on storage cupboards as an example, and want to use handles fitted with integrated locks in them then make sure they are available in the range of handles you are considering buying.
Newly installed brass door handles are always radiant, but eventually the wear and tear will cause them to lose their radiance. This wear and tear could be due to stains, grease or any other similar factor that can reduce the glow of metal. As brass is the combination of zinc and copper, it creates a golden color that gives the brass door handles their attractive and shining look.
If you want to maintain the polish of these handles, then the best possible and safest method is to use the natural and harmless products available in your kitchen. One possible method is to combine flour, vinegar and salt to make a paste then apply it on your handles. Similarly, you can also use pure lemon juice as a substitute of vinegar. If you are using ammonia, then slightly dip a piece of clean cloth in it and rub it on your handles. If you are using supermarket polish, then use the same procedure as with ammonia to rub it. This polish has the ability of removing grease, grime and dirt.
While different types of door handles are designed with unique components, the average handle has basic components. For instance, in addition to the knob top, which is the large knob that you would actually grab hold of to turn, handles are made with a spindle, shank, and knob rose. The knob rose is a round washer or plate used to form a socket. This piece is adapted so it can be attached to the actual door. Then, there is that spindle, which is the thin piece to which the handle attaches. The shank is the stem that projects from the door handle. Within the shank is a hole in which the spindle would be placed. For functionality, the door handle would be attached so the metal shaft can turn the latch to open the door.